Kbf Large Transformer Vacuum Drying Equipment

• After-sales Service: One Stop Servise
• Warranty: 2 Years
• Movement Way: Combined
• Atomization: Pressure Atomization
• Flow: Parallel Flow
• Heating Mode: Transmission
• Model NO.: KBF
• Material Status: Solution, Strap
• Drying Medium: Inactive Gas, Superheated Steam, Effluent Gas, Air
• Operation Pressure: Vacuum
• Operational Method: Continuous
• Turn-Key Projects: One-Step Service
• Standard: KCB Series Standard
• Product Name: Vacuum Casting Equipment
• Pouring Pot Size mm: 2200X3000
• Mixing Bowl: 300L
• Application Area: for Electrical Insulators
• Transport Package: Wooden
• Specification: 900*900*900
• Trademark: JC
• Origin: China
• HS Code: 84292990
• Production Capacity: 60000PCS/Year

Product Description

Main  technical  characteristics
1 ,The device from my company KBY Standard transformer vacuum drying equipment gas  burner heating  based on thermal conductivity of heat,  ma+ inly  for  gas-rich  areas,  reducing  operating  costs.
2 ,Device  vacuum  drying,  vacuum,  cryogenic  condensation  system,  tran- sformer  heating systems,  pneumatic tube system,  cooling system  and
control system.
3 ,Vacuum, vacuum  units selection of vacuum  pump with the oil-water separation,  and  reduced  operating  costs.
4 ,Imported  burner heating system  heat-conducting oil  heating,  heat con- duction  oil,  heat  to  the  tank,  safety,  reliability  and  low  running  costs.
5 ,Condenser uses  latest achievements  in the world,  horizontal condenser, stainless steel  manufacture,  recovery water automatic  control.  Configure
chiller provides  10 degrees cold water system is installed below the cond- ensation,  ensure that the  condensation  effect.
6 ,Electric  control  system  with  touch-screen  control,  automatic  control.
7 ,Compared with traditional vacuum drying and energy saving 50% Above.

Technical parameters

NO	Model	Dryer size mm	Condenser	Vacuum unit	Heating   system	Cooling system	Control mode	Open method
1	KBII-2400	2400X3000	4m² Horizontal 4m	2X-70/ZJY-300	Bumer + Heat transfer oil	Chiller	Touch screen	Laten    Reemen
2	KBII-2600	2600X3500	4m² Horizontal 4m	X-100/ZJY-300	Bumer + Heat transfer oil	Chiller	Touch screer	Latan   Roement
3	KBII-2800	2800X3500	6m² Horizontal 6m	X-100/ZJY-300	Bumer + Heat transfer oil	Chiller	Touch screen	Latera  tp men
4	KBII-3000	3000X4000	6m² Horizontal 6m	X-100/ZJY-300	Bumer + Heat transter oi	Chiller	Touch screen	Latei  Raaenen
5	KBI-3200	3200X4000	6m² Horizontal 6m	X-150/ZJY-300	Bumer + Heat transfer oi	Chiller	Touch screen	Laleral Repaeement

My Company:
 is a  high-tech  private enterprise,  it  has a experienced term, which  more than ten years engaged  in  research  and  development,  design,  manufacture  and  installation  of vacuum  equipment.  Besides,  it  is  not  only  committed to   build  high  quality  brand  about vacuum  equipment,  but  it  also  has  prodcuts, which  are widely  used  in  impregnating,  epoxy  resin  pouring, drying,  and  note  oil  processing  in  some  industries(like  metal  heat  treatment,  transformer,  and  transformer  device,  reactor  device,  reg-  ulator  device,  high  pressure  electrical,  motor,  capacitor,  switch  and  other  similar  industries).
Relying on strong technical advantages and scale advantages, and it also dedicated itslef to develop Vacuum application technology and  relative vacuum equipment  Main  products are differnent  kinds of vacuum casting equipments, vacuum drying equipment, vacuum    impregnation  equipment,  vacuum  oiling  device  equipment,  and  vacuum  heat  treatment  equipment.
The most important of this company is product qualitu, and it strictly follows international quality certification system, implmentcation od   quality poliy about'creating a  Kerry brands, buliding first-class equipment, following innovation for development, and being in accordance with customer service.It also provides the best solution, higher quality products and more valuable and efficient after-sales service for
new and old customers.