One Ton and Two Ton Winding Machine for Electric Try Type or Oil Transformer

• Customization: Available
• Voltage: 220V
• Warranty: 3 Years
• Model NO.: DHR-1T/2T
• Purpose: Suitable for Winding Circular
• Model/Parameter: Jc-800
• Outer Diameter of Wire Coil: < 600mm
• Axial Height of Coil: <800mm
• Coil Form: Circular, Oblong, Elliptical, Rectangular
• Wire Specification: Enameled Wire
• Transport Package: Wooden
• Specification: 900*900*900
• Trademark: JC
• Origin: China
• HS Code: 847981100
• Production Capacity: 60000PCS/Year

Product Description

GDY-1T GDY-2T       WINDING MACHINE

1.  General Provisions

1.1 The scope of use of this technical specification applies to the requirements for the use of 1 ton and 2 ton winding machines
2 Standards and specifications
2.1 Reference standards
According to relevant national and industry standards, advanced technology at the current stage is adopted to ensure equipment functionality
We design and manufacture with the goal of being advanced, easy to operate, stable in performance, and long-lasting in service life.

1. Conditions of Use

NO	Description		Unit	Standard value
1	ambient air temperature	maximum temperature	ºC	+40
		minimum temperature		-10
2	altitude		m	1000
3	humidity		%	≤95
4	voltage		V	AC3×380V+10%
5	frequency		Hz	50Hz+2%
6	Installation location			Indoor

1.       2 tons of main key technical parameters

NO.	Type	Parameter project	Specification parameters	Remark
1	General parameters	maximum payload(Kg)	2000
2		Working torque	>2000N/M
3		Spindle speed(r/min)	0-200r
4		Spindle center height(mm)	900
5		Maximum shaft length(mm)	1500mm
6		Axis size	40 40
7		Expansion length of tailstock telescopic shaft(mm)	0-150
9		working voltage(V)380±10%	380±10%
10		Main motor power(kW)	7.5
11		Speed Control	Frequency Control
12		Counting method	counter
Stop using status without pressing enter

1 ton main key technical parameters

NO.	Type	Parameter project	Specification parameters	Remark
1	General parameters	maximum payload(Kg)	2000
2		Working torque	>2000N/M
3		Spindle speed(r/min)	0-300r
4		Spindle center height(mm)	900
5		Maximum shaft length(mm)	1200mm
6		Axis size	40 40
7		Expansion length of tailstock telescopic shaft(mm)	0-150
9		working voltage(V)380±10	380±10 %
10		Main motor power(kW)	5.5
11		Speed Control	Frequency Control
12		Counting method	counter
Stop using status without pressing enter

4,Instructions

1. Flower plate

The flower plate is made of A3 steel and has strong rigidity.

1. Main shaft gearbox

The main shaft variable speed is composed of pulleys, variable speed transmission system, motor, etc. The spindle box variable frequency stepless speed regulation ensures a smooth start-up process and accurate and reliable braking of the entire equipment. The motor torque is reduced and amplified by the main axle box, providing winding torque.
3. Tailstock
The tailstock is equipped with a forward and backward moving mechanism that can slide forward and backward on the base to adjust the distance
4 .Electric control system


operator can use a foot switch to operate the entire winding process. The counter can count forward and backward, and has power-off memory and automatic parking function.
The main spindle box, tail box, and base are all made of high-quality steel and welded using CO2 gas shielded welding. After welding, they undergo aging treatment and then precision machining; Good welding quality and high machining accuracy ensure stable and reliable overall performance after assembly